HOW TO PROPERLY INSTALL A MODERN SHOWER FIXTURE: STEP-BY-STEP INSTRUCTIONS

How to Properly Install a Modern Shower Fixture: Step-by-Step Instructions

How to Properly Install a Modern Shower Fixture: Step-by-Step Instructions

Blog Article

Request Estimate

What are your thoughts and feelings about How to Install a Direct-to-Stud Shower Enclosure?


How to Install a Freestanding Shower Unit
A successful shower setup needs cautious preparation and also a lot of work. In most cases, you will require to do three types of jobs: framing walls, mounting the plumbing, as well as ending up wall surfaces.

Prep work


First of all, you must select the type of shower that you want to mount. It is important to identify whether the picked shower is capable of coping with certain systems as well as can manage a secure degree of water with the boiler. Many shower devices nowadays are developed to be adaptable to various water stress (such as stored warm water and also chilly mains).
It is additionally important to think about the water pressure and also the planning of the piping as well as water drainage for the shower

Different Kinds Of Shower Units


  • Push-on Mixer: The tube and spray parts of the push-on mixer shower system can be linked to the bathroom faucet according to your demand, as well as the water temperature level can be changed via the faucets. Push-on mixers are cheap and extremely easy to install. However, although the tube link is basic, it is easily displaced. In addition, it is inconvenient to readjust the temperature level.

  • Bath/Shower Mixer: The hose and spray of this sort of shower are combined with a bathroom mixer faucet, as well as the temperature can be adjusted via the bathroom faucets. It is a really low-cost choice and no added plumbing is included. However, the bath/shower mixers additionally struggle with inconvenient temperature level control options.

  • Handbook Mixer: The hose pipe as well as spray of a hands-on mixer shower system are a part of the wall surface system and the cold and hot water supplies are linked to a single valve The temperature level as well as pressure of the water are regulated via either one or a variety of handles (in much more pricey showers). Although temperature control is much easier in manual mixer kinds, they are extra expensive than the formerly mentioned mixers. They additionally call for extra plumbing of cold and hot water pipes.

  • Thermostatic Mixer: The pipe as well as spray of this shower type are a part of the wall surface device as well as the hot and cold water supplies are linked to a single shutoff right here too. It is full with an integrated stabiliser to self-adjust the water temperature and also to avoid it from coming to be as well hot. Among the most significant advantages of a thermostatic mixer shower kind includes convenient temperature control. Nevertheless, it is one of the most costly of the various mixer choices.

  • Power Shower: A power shower is a solitary unit including an effective electric pump that can modifying both the water stress as well as temperature level. This kind of shower can be fitted if there is water from a cold water cistern and also a warm water cyndrical tube. A power shower makes the modification of both pressure as well as temperature very easy. On the other hand, it is unsuitable for water warmed directly by the shower or where the water is supplied by a combination central heating boiler under keys stress.

  • Electric Shower: An electric shower is plumbed into a keys cold water supply as well as it heats up the water electrically. It is important to keep in mind that for this shower kind to be mounted, the keys pressure needs to be at least 0.7 kg/sq centimeters (10lb/sq in). The system allows the temperature level and also pressure to be adjusted via a handle. Designs with temperature stabilisers are much better as they remain untouched by various other taps elsewhere in operation within the home. A significant drawback of electrical showers is that the control knob just enables the option of heats at less pressure, or reduced temperature levels at a higher stress. This is problematic in the winter season when the spray is usually weak and the keys water is cooler. Nonetheless, this problem is tackled in some versions which are available with a winter/summer setup.


  • Approach


    Depending on the sort of shower you wish to mount, the shower head need to either be fitted in order to avoid its contact with the water in the bath listed below or the base tray, or it has to have a check valve.
    Before starting, it is suggested to mark the positions of the shower head as well as control, and to plan the pipe-work included. Furthermore, the water drainage system to get rid of the waste water will need to be intended. Both settings of the cable television route as well as the shower switch will additionally need to be considered if an immediate or electric shower unit is being installed.
    Use the direction guide offered with the shower unit to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is very important to remove the water system. In order to protect the pipelines, they need to be given a water resistant covering as well as likewise fitted with isolating valves. The pipes can then be hidden into the wall as well as plastered over to neaten the total appearance.
    Fit the base tray, shower head, and also installations.
    Link the major shower control to the pipelines that will certainly be supplying the water (This may require a women screw string adapter).
    Reconnect the water supply and examination the pipelines for any kind of leakages, as some might require firm.
    If you are mounting an electric shower, remember to turn off the electrical power supply before making any electric links. When these links have actually been made (there ought to be guidance within the user's manual), the power supply can be changed back on.

    Changing Water Stress to Fit Your Shower


    The cold water reservoir can be lifted to a greater height (often as little as 150mm (6inches)) by installation a solid wood assistance beneath it - possibly made up of struts as well as blockboards. If you pick this alternative, the primary and circulation pipes will additionally have to be elevated to meet the new height of the tank.
    Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is selected, it has to be linked right into the power supply in order to run.

    Piping and Water drainage


    It is best to make use of 15mm diameter supply pipes, and make the go to the shower as short and straight as possible so as to maintain optimal stress as well as minimise warm loss. Additionally, by minimising the use of arm joints for pipe edges, you can decrease the resistance in the flow of the water system. You can accomplish this by flexing the pipelines rather.

    Most Usual Blunders


  • Violating or disregarding neighborhood code restrictions.

  • Making use of pipelines that are as well small.

  • Connecting copper to galvanized without using a brass or dielectric fitting in between both.

  • Not using tape or pipe compound at threaded joints.

  • Not leveling your components when installing them.

  • Not installing an air space filling for fixtures.

  • Reducing supply stub outs as well short to install the shutoff valves onto after the completed wall surface is in location.

  • Not effectively aligning tubes right into fittings or quit valves. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will cause a leak.).

  • When turning the water back on in your home, always run the outside hose shutoff or purge your toilets to hemorrhage dirt and also air from the lines. This debris can cause troubles in your sink taps and also other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a Direct-to-Stud Shower Enclosure

    I hope you enjoyed reading our section on How to Install a Direct-to-Stud Shower Enclosure. Thank you so much for taking the time to read our piece of content. Sharing is caring. You just don't know, you will be doing someone a favor. Bless you for your time. Visit again soon.


    Get A Quote

    Report this page